Tiktak Daylight
Tiktak Daylight is designed to operate with optional 10 mm or 20 mm gaps, giving control over both sunlight and airflow: you decide with a single touch at which angle the sun enters your home.
The slats of the Tiktak Daylight are linked by end plugs spaced at 10 mm or 20 mm; lift the shutter one notch and the slats part by that much, letting daylight filter through. Fully lowered they close up and black out the room like a conventional shutter. The thin slats mean a small coil diameter, so the system also fits existing boxes.
Tiktak Daylight
Tiktak Daylight is designed to operate with optional 10 mm or 20 mm gaps, giving control over both sunlight and airflow.
Designed for architects and façade projects, these external sun louvre shutters deliver both aesthetics and energy efficiency for offices, plazas and villas. As a manufacturer, we supply our dealers with knock-down systems and wholesale terms.
How it works
The slim 50 mm high, 13 mm thick slats of Daylight are linked by galvanised steel side locks. The locks come with a 10 mm or 20 mm spacing: raised one notch, the slats open by that amount and daylight filters through the gaps; fully lowered, the slats close. The slim slat means a small winding diameter, so the system also fits existing shutter boxes.
Technical specifications
| Slat | 50 × 13 mm extruded aluminium |
| Light gap | 10 mm or 20 mm (selected with the galvanised steel side lock) |
| Maximum recommended width | 2000 mm |
| Maximum recommended height | 2400 mm |
| Guide profiles | 26 × 35 mm · 26 × 66 mm · 26 × 100 mm |
| Box types | Front-mounted and built-in (concealed) box |
| Control | Tubular motor; remote control, wall switch or smart-home system |
| Colour | All RAL colours, electrostatic powder coating |
Winding diameters
| Architectural height | 10 mm gaps | 20 mm gaps |
| 1000 mm | 185 mm | 185 mm |
| 1200 mm | 195 mm | 200 mm |
| 1400 mm | 205 mm | 210 mm |
| 1600 mm | 215 mm | 225 mm |
| 1800 mm | 225 mm | 240 mm |
| 2000 mm | 235 mm | 245 mm |
| 2200 mm | 245 mm | 255 mm |
| 2400 mm | 255 mm | 265 mm |
| 2600 mm | 265 mm | 280 mm |
| 2800 mm | 275 mm | 285 mm |
| 3000 mm | 285 mm | 290 mm |
The diameters refer to the rolled curtain; always add at least 3 cm of tolerance inside the box.
Sections and profile dimensions
Drawings are taken from the technical catalogue; dimensions in mm. Download the catalogue for detailed sections and installation details.
Frequently Asked Questions
What is a sun louvre shutter?
A sun louvre shutter is a movable shutter with an adjustable slat angle that lets light in while keeping the sun and heat out.
How do I choose between 10 mm and 20 mm gaps?
10 mm gaps give more privacy and shade, 20 mm gaps more light and ventilation. The choice is made in production with the side lock; our authorised dealer advises according to the orientation of the façade.
What is the difference between Tiktak Orient, Daylight and Airlight?
On Orient the slats tilt up to 60°; Daylight uses slim slats with fixed 10 or 20 mm gaps and has the smallest winding diameter; Airlight 30 uses 30 mm slats with 50 mm ventilation slots and spans up to 4 m. Orient and Daylight are installed with front-mounted and built-in boxes, Airlight 30 also with monoblock boxes.
What sizes is Daylight recommended for?
The recommended limit is 2000 mm wide and 2400 mm high. The slat is 50 × 13 mm extruded aluminium; for wider openings, Airlight 30, which reaches 4000 mm with its 30 mm double-walled slat, is used.
Does Daylight ventilate while closed?
No. When the slats are fully lowered the gap closes and the room is blacked out; ventilation happens in the intermediate positions where the slats part by 10 or 20 mm. Where the light has to be tuned storey by storey, an external venetian, which takes a separate slat angle at every height, is preferred.
How all six models behave for slat movement and blackout is in the sun louvre comparison.
Measurement and quote
Tiktak Daylight is made to measure at our İzmir facilities and supplied as a knock-down system to our authorised dealers across Türkiye; measuring and installation are carried out by your nearest Ferrini dealer.
Technical files are in the dealer portal
Technical catalogues, DWG drawings, installation files and current price lists are in the Ferrini dealer portal. Not a dealer yet? Apply and we will open access.