Atrium Sliding Glass Wall
Atrium is the parking-zone system of the Albert Genau sliding glass wall family: every panel moves independently and, when opened, parks neatly behind a wall or in a corner. For shopfronts, restaurant entrances and wide openings.
Inside the top-hung carrier profile each panel runs on its own Quattro HD rollers; because the panels are not linked, they can be moved to the parking zone one by one or all together. There is no channel or threshold in the floor. Panels up to 3.3 m high and 80 cm wide; wind, dust and noise control with EPDM gaskets and brushes.
Independent panels, hidden parking zone
When you open the glass, gather the panels behind a wall or in a corner; the space opens completely and the façade becomes an uninterrupted view.
Shop and restaurant façades
A fully open shopfront by day, a locked transparent façade by night: Atrium solves the entrance and façade layout of commercial spaces with one system.
Sliding glass wall technology
150 kg panels, feather-light movement
Thanks to the Quattro HD roller system, huge glass panels move with minimal friction; each roller carries 150 kg.
Locking without bending
The locks under the panels are opened and closed with a light touch of the toe; the easy floor lock fixes the panel in place.
Pin security and four-season protection
The glass is held by eccentric glass pins in addition to adhesive; EPDM gaskets in the side profiles and brushes top and bottom keep out wind, dust and noise.
Frequently asked questions
Is there a threshold or track in the floor?
No. The system is top-hung; the floor only has small lock sockets. The floor stays completely flat and passage is unobstructed.
Are the large glass panels hard to move?
No. With the Quattro HD roller system the panels move with very low friction, with one hand.
Is there a risk of the glass falling?
The panels are carried by eccentric glass pins, not just adhesive; the mechanical locking physically prevents the glass from leaving the profile.
Will the system rust over time?
All mechanical and accessory components are made of corrosion-resistant materials and covered by the corrosion warranty.
Plan your project with Ferrini
Ferrini is the authorised manufacturer of Albert Genau systems. The Atrium is produced in our İzmir facilities with original profiles, hardware and motors and supplied as a knock-down system to our authorised dealers across Türkiye; measuring, glass, colour and motor selection and installation are handled by your nearest Ferrini dealer.
Contact us for your nearest dealer and a quote
Technical files are in the dealer portal
Technical catalogues, DWG drawings, installation files and current price lists are in the Ferrini dealer portal. Not a dealer yet? Apply and we will open access.